The most powerful, reliable, and feature-filled two-layer racing combo on the market. Contains a PowerCube FPVision, an ESC Extension board, and a Colibri Race V2.0 . You'll wonder what to do with all the extra room!
Add a set of 4 Cobra Champion 2205-2300kv motors and TBS BulletProof 25A BLHeli-S ESCs to make even your mortal enemies jealous.
TBS POWERCUBE FC - COLIBRI RACE 2.0
STM32F303 based chipset for ultimate performance
PPM, SBUS, DSM, DSMX input (5V and 3.3V provided over internal BUS)
6 PWM ESC output channels (autoconnect, internal BUS)
Choose between plug & play sockets or solder pads for R/C and buzzer
36x36mm standard size (30.5mm standard raster)
RGB LED strip support incl. power management
Extension port for GPS / external compass / pressure sensor
UART port for peripherals (Blackbox, FrSky telemetry etc.)
5V buzzer output
MPU6000 new generation accelerometer/gyro
Runs Betaflight, Cleanflight and Baseflight
4x status LED (DCDC 5V pwr/ 3.3V pwr/ status/ 4.7V pwr)
NEW IN V1.2:
PWM Pads for external ESC support
Stronger protection Diode
Resettable fuse to protect parts beeing burnt in case of a short on 3.3V
Additional 4.7V running LED
New IMU supply rail for best in class low noise performance
The TBS POWERCUBE FPVision combines the forward-thinking of an 800mW-capable Unify Pro, the mind-bending capabilities of the full-graphic CORE PRO OSD, a 250A current sensor and a TBS DCDC V2 all in one 36mm x 36mm PBD. At an incredibly low weight of 8.6g, the POWERCUBE FPVision is the next step in fpv racing integration. It replaces the TBS PDB in the powercube!
INCREDIBLE FORM FACTOR
The TBS POWERCUBE FPVision is the epitome of miniaturization. With the goal of reducing all-up-weight and wire spaghetti in drone racing, this masterpiece completely disappears on the FC-stack, and it takes a lot of components with it! But unlike similar solutions already out there, it doesn't actually compromise on performance!
FULL GRAPHICS OSD
Don't worry about sacrificing functionality for weight. With a full-graphics OSD, the possibilities are endless. Nice analog "fuel" gauges, different size text and fonts, clean and readable menus! The POWERCUBE FPVision lets you use RC Stick commands (BST or Colibri FC required) to customize all aspects of your on-screen display, as well as tune your flight control (Colibri FC required).
BUILT IN VTX
With the UNIFY PRO, TBS has created the best VTx for FPV Racing. The FPVision builds on the success of that, and takes it even further. With peak values well beyond 1400mW, the VTx will settle on a stable 800mW and more if really necessary, or whisper on a precise 25mW when needed. With full integration, features such as PitMode really shine.
FPV CAMERA INTEGRATION
While the camera technology keeps evolving, one thing remains the same: Less than ideal settings for weather and time of day require you to modify the settings according to the situation, often between races! To make this process effortless, you can navigate the camera menu through your R/C sticks. And if that wasn't enough, the 2nd camera port allows you to switch between 2 views!
Current Sensor: 100A sense, 250A peak throughput
Dimensions: 36mm x 36mm x 6mm
Full graphics CORE PRO OSD
25 - 800mW Video Transmitter with PitMode and CleanSwitch
Lost-model buzzer, R/C switch activated
Filtered power for cam (software select 5V / 12V)
Dual camera ports (with cam1 menu navigation feature)
TBS POWERCUBE FPVision
Terminating plastic shoe to isolate the standoffs from carbon fiber
Mounting screws and standoffs
SMA U.FL Pigtail
RP-SMA U.FL Pigtail
TBS PowerCube FPVision
Diagonal External ESC Board
TBS PowerCube Colibri Race 2.0